All Flex Conducts Successful Study on High Wattage Heaters for Medical Instruments :: I-Connect007

Estimated reading time: 1 minute

Flexible circuit board and flexible heater specialist All Flex recently addressed that their customer base for Medical Diagnostic, DNA Testing, P.O.C. instruments and Cancer Diagnostics have been consistently needing to accommodate faster test results while also making their instruments and the corresponding thermal systems smaller. This resulted in the need for higher wattage heaters other than the traditional Kapton, polyimide, or silicone rubber heaters commonly available on the market. All Flex has come up with a successful solution for this particular problem: etched foil heaters.

One of the greatest demands on a etched foil flexible heater is with rapid warm-up and high wattages. All Flex has tested our high watt heaters up to 115 watts per square inch, which is 50% higher watt density compared to the next highest available. These tests result showed that etched foiled heaters stood up against the demands of Molecular Diagnostic/DNA testing, where fast warm-up and rapid cool down is required, with no degradation after 100,000 thermal cycles.

Study: High Wattage Polyimide Heater for Molecular/DNA and P.O.C. Instruments

Test Results After 100,00 Cycles

For more specific information on this study or to learn more about their services, please contact All Flex at www.allflexinc.com or www.allflexheaters.com.